Since we moved into our home three years ago, I’ve wanted to build a workbench so I would have an area to work on projects. I’ve done a few since moving in August 20, 2022: painting a lot of the rooms, painting the garage, making a spice rack out of a wooden pallet, painting book shelves, sanding down and painting a hutch, and more bookshelves. But I haven’t really built anything. The workbench would be the first building project.

I watched a lot of DIY videos on YouTube about building workbenches in preparation and finally settled on the following one here. I thought that one was simple enough to give it a go.

I bought the wood in early August and started on the 6th. Here are photos of my progress with commentary.


You can see the need for a workbench already. I had to start in the driveway.


Once I had the two sides put together, I had to put together the two sides. This is where the seeds of doubt began to sprout. I thought for sure the project would be a bust. Please notice the bungee cords I was using to try and hold it together while I put in the lag bolts. I ended up buying two large clamps.

My little helper.


It started to come together.


Once I had it set up, I realized that the way it was positioned, there would be no room to work off the edge of the table. My garage isn’t wide enough being only a single-car garage. I needed to turn it against the right wall, which caused a problem keeping it level. If you will notice down in the right-hand side of the photo, the big crack in the foundation of the garage? I had to use a brick to level it out once I turned it.


Once I turned the table and leveled it, I wanted it as flush as I could get it up next to the wall.

This was after I realized I needed more 2x8s.


Notice how solid the joints are. I had a man in my church tease me saying it was over-engineered.



The final piece was the backsplash against the wall. It was an extra piece that I didn’t want to go to waste.



Looking underneath.


Declaring it done!



If you watch the video, let me know how close I came to duplicating the table. I will say that I made my table higher and deeper. Bigger is better!

All photos © Timothy J. Hammons, 2025.

 

Podcast also available on PocketCasts, SoundCloud, Spotify, Google Podcasts, Apple Podcasts, and RSS.

5 responses

  1. Nicely done, Tim. Sturdy and useful, for sure. I think you will come to appreciate the backsplash when it stops a few things from rolling off and falling behind.

    Like

    1. Great point. Didn’t think of that.

      Would you stain it or leave it raw wood?

      Liked by 1 person

      1. I’d leave it. Sooner or later you’re going to want to mount something to it or slip with a chisel or who knows what. I set a circular saw down on mine when the blade guard hadn’t fully retracted. I had to set in a patch.

        Like

  2. Your precision and attention to detail is most admirable. Good job. I wouldn’t want to spoil my record by not stopping half way through and never quite finishing.

    Mike O

    Like

    1. So far, I’ve been blessed to be able to finish all my projects in the last three years. But I have also been careful about starting them… and gauging if I have the time to finish.

      But that doesn’t count for projects in the yard. That is a different beast all together. 🙂

      Like

Leave a comment

The Podcast

Join Naomi Ellis as she dives into the extraordinary lives that shaped history. Her warmth and insight turn complex biographies into relatable stories that inspire and educate.

About the podcast